Products > Heating Element Device > Cartridge Heater > cartridge heater fin type
Product name : cartridge heater fin type
Item : 20151220162638
Series № : MMTP-
Heating Material : Nickel chrome resistance wire
Way of Heat Transfer : conduction
Heating Feature : instant heating
Insulation Material : Mgo
Standard Certification : UL ROHS
 Enlarge Image                   Back
←[Previous Product]              [Next Product]→


Details:

Hotohms™ Cartridge Heating device (MMTP- Series)
Product Feature:
-Diameter: 3~25 mm
- No limit on length: 20~2000 mm
- High power density: 20 W / cm2
- Low watt density cartridge heaters in brass or SS 304 sheath with watt density of 5 watt /sq.cm.
-Resistance heating wire : NiCr 80/20 wire
-Sheath: stainless steel 304,321,316, Incoloy 800, Incoloy 840
-Maximum temp.: 800 degree Celsius
-Voltages available: 380V,240V, 220V,110V,36V,24V or 12V

Technical Parameters and QC Testing:
- Heating up time: ≤ 15 min
- Power Tolerance:± 10% (if rated power ≤ 100 W) -10% ~ +5 % or 10 W (if rated power > 100 W)
- Leakage Current:
Cold leakage current ≤ 0.5 mA
Hot leakage current: I ≤ 5 mA
I = 1/6(tT×0.00001)
I— hot leakage current (mA)
t— heating length (mm)
T— working temperature (℃)
If there are several heaters in series, the hot leakage should be tested upon the full series circuit.

- Insulation Resistance:
Cold insulation resistance ≥50 MΩ
Hot insulation resistance R ≥1 MΩ
R=「(10-0.015T)/t」×0.001
R— hot insulation resistance (MΩ)
t— heating length (mm)
T— working temperature (℃)

Other testing:
- Withstand Voltage Strength
- Power on-off
- Thermal resistant
- Overload capacity


Related Products :
cartridge heater for 3D printer
201510269597
cartridge heater for 3D printer
Cartridge Heating device
20151021172535
Cartridge Heating device
cartridge heater
201622212937
cartridge heater
cartridge heater device
2015122016349
cartridge heater device
Square cartridge heaters
2015113016223
Square cartridge heaters